Skip to main content

Separation & dewatering equipment for Canada and the United States since 2014Call 604.484.4516 · Toll free (888) 588-0480

HAUS DDE 4742 Decanter Centrifuge

HAUS DDE 4742 decanter centrifuge, supplied and supported in North America by Archer Separation Inc.

HAUS DDE 4742 decanter centrifuge with stainless casing, red end hoods and drive motor, on a charcoal steel frame
  • 470 mmBowl diameter
  • 3,400 rpmMaximum bowl speed
  • 3,020 gG-force
  • 37 + 15 kWMain + back-drive motor, standard
  • 4,200 kgTotal weight

Download the datasheet (PDF)   Version française

Decanter centrifuge for sludge dewatering

Overview

The DDE 4742 is a two-phase decanter centrifuge with a horizontal solid bowl and a scroll conveyor that discharges the separated solids continuously. HAUS designed it for small municipal and industrial wastewater treatment plants and small potable water plants.

It removes most of the suspended solids from the feed and produces a drier cake. Two motors, each on its own variable frequency drive, turn the bowl and the scroll, so the bowl speed and the differential speed can both be changed while the machine runs.

How it works

The feed enters along the axis and is brought up to speed inside the bowl. Centrifugal force settles the solids against the bowl wall. The scroll, turning slightly faster or slower than the bowl, carries them to the conical end and out through the cake ports at a smaller radius, where they drain further.

The clarified liquid, the centrate, leaves over weir plates at the cylindrical end. The differential speed sets the solids conveying capacity and the cake dryness; the weir diameter sets the pond depth and the clarity of the centrate. The back-drive motor sets the scroll speed and can be adjusted during operation.

Applications

  • Municipal wastewater sludge
  • Industrial wastewater sludge
  • Sludge thickening
  • Sludge dewatering
  • Potable water plant residuals
  • Aquaculture
  • DAF float

Key features

  • High G-force from a slender bowl turning at high speed.
  • Adjustable pond depth for positive, neutral or negative operation.
  • Variable scroll differential speed, to handle changing solids loads at the cake dryness wanted.
  • Dual drive: a main motor on the bowl and a back-drive motor on the scroll, each on a variable frequency drive, joined by a gearbox without a friction clutch.
  • PLC with operator panel (HMI) for automatic operating modes, cake dryness and process settings, and alarms.
  • Rigid steel base frame, epoxy painted, with vibration dampers and anchor plates for floor mounting.
  • Stainless steel rotating parts; scroll flight tips and feed zone protected by sprayed hard-facing against wear.
  • Double-wall stainless steel casing with a hinged cover for bowl inspection and cleaning, and separate guards over the drives for maintenance access.

Technical data

ConfigurationTwo-phase, dual drive, variable differential speed
Bowl diameter470 mm
L/D ratio4.03
Cone angle15°
Maximum bowl speed3,400 rpm
G-force3,020 g
Hydraulic capacity, biological sludge20 to 35 m³/h ¹
Solids capacity500 to 1,000 kg DS/h nominal; 1,200 kg DS/h maximum ¹
Main drive motor37 kW standard; 45 kW optional
Back-drive motor15 kW
GearboxCycloidal or planetary, 7.96 kN·m nominal torque; 8 kN·m optional
Electrical supply480 V or 600 V, 3-phase, 60 Hz, to suit the site
Noise levelLAeq ≤ 85 dB(A)
Total weight4,200 kg; rotating assembly 1,165 kg
Dimensions L × W × H4,696 × 1,100 × 1,371 mm (standard motors)
Clearance to lift the bowl2,700 mm minimum
Feed inletØ63 mm tube (DIN 11850) or DN 50 union (DIN 11851)
Polymer inlet; wash waterG 3/4 (ISO 228); 3/4 coupling (ISO 228)

¹ HAUS rating under the best conditions. Capacity depends on the sludge and the polymer; Archer confirms it for each project from tests on the sludge.

Materials of construction

BowlDuplex stainless steel; super duplex optional; lean duplex for specific processes
Bowl wear linersAISI 316Ti strips; super duplex optional
Scroll body and flightsAISI 304; AISI 316L, duplex or super duplex optional
Flight and feed zone protectionHard-facing selected to suit the process
Solids discharge portsReplaceable hardened cast iron bushings; sintered tungsten carbide optional
CasingDouble-wall stainless steel
FrameCarbon steel, epoxy painted

Main dimensions (mm)

Dimension drawing of the HAUS DDE 4742 decanter centrifuge, side and end views with the main dimensions in millimetres

Standard supply from HAUS

  • Decanter, stand-alone, two-phase, dual drive
  • Control panel with PLC and variable frequency drives for the main and back-drive motors
  • Set of tools
  • Operator manuals

North American package

  • Main and back-drive motors supplied for the site voltage, 480 V or 600 V, 3-phase, 60 Hz.
  • Control panel offered with a CSA or cUL label.
  • Panel and field enclosures rated to NEMA / EEMAC types to suit the installation.
  • Installation supervision, start-up, operator training, parts and service from Archer, Port Coquitlam, BC.

Options supplied by Archer

  • Control panel with PLC, operator panel (HMI) and variable frequency drives for both motors.
  • Cake discharge chute and diverter gate.
  • Centrate chute and flexible connections.
  • Polymer make-up and dosing system.
  • Sludge feed pump, polymer pumps, valves, flowmeters and instruments.
  • Automatic bearing lubrication.
  • Remote monitoring of the machine and its process data.

Sizing a decanter for your sludge?

Our engineers test your sludge, size the machine and supply the complete package: feed pump, polymer system, cake conveyor and control panel.

Talk to an engineer

Other HAUS DDE models

DS-DDE4742-EN · Rev. A · 2026-11-08 · Specifications subject to change.

Talk to an engineer about your separation challenge

Contact us today with all your separation and dewatering challenges.