Skip to main content

Separation & dewatering equipment for Canada and the United States since 2014Call 604.484.4516 · Toll free (888) 588-0480

Roots Blowers

A durable, low-cost, low-maintenance and efficient blower for wastewater aeration, vacuum and pneumatic conveying.

Sometimes it is simply a necessity: a treatment system has to aerate industrial or organic waste. Without that air to feed the micro-organisms that digest the waste, a wastewater plant may not meet its BOD and COD limits. Archer Separation provides Roots-type blowers, an aeration solution for sewage and waste that is low-cost, low-maintenance and highly efficient.

What are the advantages of Roots-type blowers?

How a Roots blower works

A Roots blower is a positive-displacement machine. Two matched lobe rotors (rather than the more familiar cogs or gears) turn in opposite directions inside a durable cast-iron casing. With each turn, the lobes trap a pocket of air at the inlet and carry it round to the discharge.

The close, non-contact fit of the counter-rotating rotors creates the pressure difference between the two sides that drives the flow. This suits Roots blowers to systems where water vapour is present and would cause compression problems for other types of blower.

Animation of how a roots blower works
Wastewater aerationVacuum pumpingPneumatic conveyingIndustrial and organic waste treatment

Steady output at low pressure

Roots blowers add small, regulated pressure increases compared with other compressors. That restraint lets them deliver a consistent output at lower speeds and pressures than traditional compressors, which can demand a lot of flow or a very high pressure rise. The low operating pressure gives Roots blowers an excellent ratio of output to energy cost, and lower noise than many other compressor systems for industrial or organic waste.

These qualities make a Roots blower well suited to pneumatic duties such as industrial or organic wastewater treatment and conveying, which need large volumes of air at low pressure to oxygenate the biochemical reactions. More oxygen means more efficient treatment, so Roots blowers help plants meet stricter environmental standards with lower operating costs and fewer maintenance headaches.

Advantages of a Roots-type blower

High output for the energy used

Continuous, stable airflow with over 90% volumetric efficiency at optimal speeds. Archer Separation has decades of experience helping partners reach this efficiency, both at installation and remotely.

Non-contact pumping

Counter-rotating lobed rotors that never touch give a high ratio of output to energy: ideal for waste treatment, where aeration and digestion are essential to meet environmental standards.

Simple, durable construction

Cast-iron construction means a low purchase cost and easy long-term maintenance, making Roots blowers a worthwhile investment for industrial and organic waste systems.

Unobtrusive

Minimal noise and vibration make Roots-type blowers suitable for a wide range of installation environments.

Aeration and conveying in one machine

With these advantages, operators can treat a Roots blower as an all-in-one solution for aerating and compressing a wastewater system. It delivers a great deal of air for little energy, with long-term durability, so operators can spend their time and resources elsewhere. The blower adds the oxygen that drives the biochemical reactions and conveys the waste, and Archer Separation handles remote adjustment and optimization of your equipment.

Related pages

Talk to an engineer

Talk to an engineer about your separation challenge

Contact us today with all your separation and dewatering challenges.