Chemical Systems
Chemical Dosing-Skid Systems (DSS) are designed to feed liquid chemicals from a tank to an injection point in the process
Our chemical dosing skids are pre-engineered packages for precise, safe and reliable chemical injection. Each one arrives assembled, piped and tested, ready to connect to your process lines and utilities, so installation and commissioning take far less time on site.
Kozegho Dosing Systems' skids are pre-assembled structures for easy commissioning. They can carry one or more pumps, with one or two dosing points, and a calibration pot that keeps the dose under control for a better process yield.
Generic flowsheet for illustration. Every Archer system is designed to its own basis; ask us for one drawn for your plant.

Built on high-density polyethylene
The skid structure is made of high-density polyethylene (PEHD). It carries the piping and every other component of the dosing system:
- Safety (pressure relief) valves and back pressure valves
- Check valves and manual valves
- Pressure gauges and pulsation dampers
- Calibration pots
Dosing pumps from 1 l/h to 2 m3/h
We fit the pump that suits your chemical and your flow, from small metering pumps to larger motor-driven units:
The material of each component is selected for the product being dosed and the working pressure of the system:

Construction options
The structure may be built in PE100 or PP, and may include:
- Shelves for the dosing pumps
- Acrylic doors or sliding doors, with or without handles
- Bunds that contain any spill during dosing
- A threaded outlet sized for each line
Chemical skids we have built
Four recent Archer chemical skids, rendered from our own 3D models. Every skid is modelled in full before fabrication, so pipe routing, valve access and maintenance clearances are checked on screen, not on site.
Duplex dosing panel on an HDPE back board

Duty and standby diaphragm metering pumps on a wall-mounted HDPE back board, with a calibration column, pulsation dampener, back-pressure valve and a gauge on a diaphragm seal. Sch 80 PVC piping with true-union valves throughout, and a junction box for the pump wiring.
- Electrical junction box
- Diaphragm metering pumps (Grundfos DDA), duty / standby
- Isolation ball valves (DN15)
- True-union ball valves (DN50)
- Back-pressure valve
- Calibration column
- Pressure gauge with diaphragm seal
- Pulsation dampener
- HDPE back board
Duplex DAF chemical dosing skid with containment
A free-standing HDPE skid for DAF coagulant or polymer dosing. Duty and standby metering pumps sit on a containment floor, with Y-strainers, pressure relief, a pulsation dampener, a calibration column and a solenoid-valve flushing line.
- Diaphragm metering pumps (Grundfos DDA), duty / standby
- Calibration column
- Back-pressure / pressure-relief valves
- Pulsation dampener
- Pressure gauges
- Y-strainers
- Isolation ball valves
- Flushing-water solenoid valve
- HDPE skid with containment floor

Stainless steel duplex dosing skid

For sites that want stainless: a 316 SS back panel and drip tray, duty and standby metering pumps, stainless ball and solenoid valves, a check valve and an in-line static mixer at the discharge.
- Diaphragm metering pumps (Grundfos DDA), duty / standby
- Pressure gauges
- Stainless steel ball valves
- Stainless steel solenoid valves
- Static mixer
- Check valve
- Stainless steel skid with drip tray
- Stainless steel back panel
Stainless steel sampling and sensor skid
A sampling skid that draws a continuous sample with a peristaltic pump past water-quality sensors in stainless flow cells. A flow switch proves the sample is moving, and the transmitter sends the readings to the PLC and to our remote monitoring.
- Peristaltic sample pump
- Analyser / sensor transmitter
- Sensor flow cells (stainless)
- Water-quality sensors in flow cells
- Sensor cable junction block
- Sample flow switch
- Stainless steel back panel and base

See also our dry KMnO4 feed and dosing system and polymer make-down systems.
Simplex, duplex, triplex or custom


Simplex
One dosing pump. A cost-effective, straightforward choice for a single injection point, continuous or intermittent, where a short stop for maintenance is acceptable.
Duplex
Two dosing pumps: duty/standby for full redundancy (automatic changeover available), both running in parallel for more flow, or two independent lines for two chemicals or two injection points.
Triplex
Three dosing pumps: duty/duty/standby for critical dual-injection processes, or three independent dosing lines on one compact skid.
Custom
When a standard package does not fit, our engineers design one that does: more pumps, special control logic, extra instruments or an unusual footprint.
Technical information
| Flow | 0.026 to 2,100 L/h |
|---|---|
| Operating pressure | Up to 150 bar |
| Turndown ratio | Up to 3000:1 |
| Power | 115 or 230 VAC, 50 or 60 Hz, 1 or 3 phase |
| Simplex dimensions | 1000 mm high × 720 mm wide × 520 mm deep |
| Standard components | Isolation valve, Y-strainer, calibration column, pressure gauge with diaphragm gauge guard, relief valve, dosing pump, back pressure valve |
| Testing | Factory acceptance tested (FAT) before shipment |
Flow and pressure depend on the pump selected; each skid is sized for its duty.
Example: dry permanganate feed and dosing
See the complete KMnO4 dry feed and dosing system with 3D renders and a walk-around video.
A typical Archer chemical system takes a dry chemical from drum to dosing point: vacuum loading into a hopper, a screw feeder with load cell, wetting and an inline eductor, then batch mixing tanks with level control and automated valves.
Generic flowsheet for illustration. Every Archer system is designed to its own basis; ask us for one drawn for your plant.
Where our dosing skids are used
Water and wastewater treatment
Disinfection, pH control, coagulation and flocculation.
Food and beverage
CIP systems, disinfection and sanitation.
Oil and gas
Corrosion inhibitors, scale inhibitors and biocides.
Chemical processing and manufacturing
Reagent dosing to suit your process.
Dosing Skid System

A free-standing skid with the pumps, piping, valves and instruments mounted on one structure, ready to set down and connect.
Shelved System
The dosing pumps sit on shelves inside the structure, which can be closed with acrylic or sliding doors and fitted with a bund.

Choose the chemistry on evidence
Our JarLab platform keeps every jar test and lab analysis in one record, finds the programmes that worked on similar waters and issues permit-checked treatment reports.
Related pages
- Oil sludge and slop oil recovery
- Kozegho Dosing Systems
- Polymer Systems
- DAF / Dissolved Air Flotation Systems
- Remote Monitoring: the IIoT Gateway dosing controller
- Control Panels
- Skid Systems
Tell us the chemical, the dose and the injection point, and we will propose the right skid.
