HAUS DDE 3542 Decanter Centrifuge
HAUS DDE 3542 decanter centrifuge, supplied and supported in North America by Archer Separation Inc.

- 353 mmBowl diameter
- 4,200 rpmMaximum bowl speed
- 3,460 gG-force
- 18.5 + 5.5 kWMain + back-drive motor, standard
- 1,650 kgTotal weight
Download the datasheet (PDF) Version française
Decanter centrifuge for sludge dewateringOverview
The DDE 3542 is a two-phase decanter centrifuge with a horizontal solid bowl and a scroll conveyor that discharges the separated solids continuously. HAUS designed it for small municipal and industrial wastewater treatment plants and small potable water plants.
It removes most of the suspended solids from the feed and produces a drier cake. Two motors, each on its own variable frequency drive, turn the bowl and the scroll, so the bowl speed and the differential speed can both be changed while the machine runs.
How it works
The feed enters along the axis and is brought up to speed inside the bowl. Centrifugal force settles the solids against the bowl wall. The scroll, turning slightly faster or slower than the bowl, carries them to the conical end and out through the cake ports at a smaller radius, where they drain further.
The clarified liquid, the centrate, leaves over weir plates at the cylindrical end. The differential speed sets the solids conveying capacity and the cake dryness; the weir diameter sets the pond depth and the clarity of the centrate. The back-drive motor sets the scroll speed and can be adjusted during operation.
Applications
- Municipal wastewater sludge
- Industrial wastewater sludge
- Sludge thickening
- Sludge dewatering
- Potable water plant residuals
- Aquaculture
- DAF float
Key features
- High G-force from a slender bowl turning at high speed.
- Adjustable pond depth for positive, neutral or negative operation.
- Variable scroll differential speed, to handle changing solids loads at the cake dryness wanted.
- Dual drive: a main motor on the bowl and a back-drive motor on the scroll, each on a variable frequency drive, joined by a gearbox without a friction clutch.
- PLC with operator panel (HMI) for automatic operating modes, cake dryness and process settings, and alarms.
- Rigid steel base frame, epoxy painted, with vibration dampers and anchor plates for floor mounting.
- Stainless steel rotating parts; scroll flight tips and feed zone protected by sprayed hard-facing against wear.
- Double-wall stainless steel casing with a hinged cover for bowl inspection and cleaning, and separate guards over the drives for maintenance access.
Technical data
| Configuration | Two-phase, dual drive, variable differential speed |
| Bowl diameter | 353 mm |
| L/D ratio | 3.88 |
| Cone angle | 15° |
| Maximum bowl speed | 4,200 rpm |
| G-force | 3,460 g |
| Hydraulic capacity, biological sludge | 6 to 15 m³/h ¹ |
| Solids capacity | 250 to 500 kg DS/h nominal; 600 kg DS/h maximum ¹ |
| Main drive motor | 18.5 kW standard; 22 or 30 kW optional |
| Back-drive motor | 5.5 kW standard; 7.5 kW optional |
| Gearbox | Cycloidal or planetary, 3.12 kN·m nominal torque; 3 kN·m optional |
| Electrical supply | 480 V or 600 V, 3-phase, 60 Hz, to suit the site |
| Noise level | LAeq ≤ 85 dB(A) |
| Total weight | 1,650 kg; rotating assembly 650 kg |
| Dimensions L × W × H | 3,524 × 885 × 1,081 mm (standard motors) |
| Clearance to lift the bowl | 2,000 mm minimum |
| Feed inlet | Ø51 mm tube (DIN 11850) or DN 40 union (DIN 11851) |
| Polymer inlet; wash water | G 3/4 (ISO 228); 3/4 coupling (ISO 228) |
¹ HAUS rating under the best conditions. Capacity depends on the sludge and the polymer; Archer confirms it for each project from tests on the sludge.
Materials of construction
| Bowl | Duplex stainless steel; super duplex optional; lean duplex for specific processes |
| Bowl wear liners | AISI 316Ti strips; super duplex optional |
| Scroll body and flights | AISI 304; AISI 316L, duplex or super duplex optional |
| Flight and feed zone protection | Hard-facing selected to suit the process |
| Solids discharge ports | Replaceable hardened cast iron bushings; sintered tungsten carbide optional |
| Casing | Double-wall stainless steel |
| Frame | Carbon steel, epoxy painted |
Main dimensions (mm)

Standard supply from HAUS
- Decanter, stand-alone, two-phase, dual drive
- Control panel with PLC and variable frequency drives for the main and back-drive motors
- Set of tools
- Operator manuals
North American package
- Main and back-drive motors supplied for the site voltage, 480 V or 600 V, 3-phase, 60 Hz.
- Control panel offered with a CSA or cUL label.
- Panel and field enclosures rated to NEMA / EEMAC types to suit the installation.
- Installation supervision, start-up, operator training, parts and service from Archer, Port Coquitlam, BC.
Options supplied by Archer
- Control panel with PLC, operator panel (HMI) and variable frequency drives for both motors.
- Cake discharge chute and diverter gate.
- Centrate chute and flexible connections.
- Polymer make-up and dosing system.
- Sludge feed pump, polymer pumps, valves, flowmeters and instruments.
- Automatic bearing lubrication.
- Remote monitoring of the machine and its process data.
Sizing a decanter for your sludge?
Our engineers test your sludge, size the machine and supply the complete package: feed pump, polymer system, cake conveyor and control panel.
Other HAUS DDE models
DS-DDE3542-EN · Rev. A · 2026-11-08 · Specifications subject to change.
