Skip to main content

Separation & dewatering equipment for Canada and the United States since 2014Call 604.484.4516 · Toll free (888) 588-0480

Lower Mainland BC Rendering Plant: Grease Trap Waste Case Study

A combined screening and grit removal unit and a small DAF let a rendering plant in the Lower Mainland, BC receive and treat grease trap waste.

X2 Solutions SET combined pre-treatment unit with screw compactor and grit trough before shipping
2016Commissioned
SET 3.15combined pre-treatment unit
50 m³/hpre-treatment capacity
X-FL 100DAF for the effluent

The application

The client renders animal by-products and recycles used cooking oil. At its plant in the Lower Mainland of BC it also receives grease trap waste from restaurants and food businesses, which arrives full of rags, plastics, grit and sand.

Before the grease can be recovered, that debris has to come out. Archer proposed an all-in-one pre-treatment unit from X2 Solutions of Italy, which screens, washes and compacts the screenings and settles out grit and sand in one stainless steel unit, followed by a compact DAF unit for the water that leaves it.

Archer delivered and commissioned the equipment in 2016, trained the operators, and has supplied parts and service for it ever since.

What Archer supplied

  • X2 Solutions SET 3.15 combined pre-treatment unit, 304 stainless steel: TSC 300 screen and screw compactor with 6 mm perforated screen, wash systems for basket and transport zone
  • Aerated grit and sand separator with shaftless horizontal and inclined (35°) extraction screws, blower and control panel
  • X2 Solutions X-FL 100 dissolved air flotation unit for the grease trap effluent water
  • Commissioning and operator training (2016)
  • Ongoing spare parts and repairs: skimmer gearbox, wear sleeves, brushes and screw liners (2016–2026)

Design basis

WasteGrease trap waste received by truck
Pre-treatment unitX2 SET 3.15, 50 m³/h, DN 200 inlet and outlet
Screen300 mm diameter, 6 mm perforated
DAFX2 X-FL 100, about 3 m³/h

From Archer proposals 5062601 and 5062603 (July 2015) and the unit nameplate.

Screen basket and shaftless screw of the screw compactor
Screen and compactor. Screenings are washed, compacted and discharged.
Pre-treatment unit with inclined grit screw during installation at the rendering plant
Installation. The unit being set in place in 2016.

Related

Talk to an engineer

Talk to an engineer about your separation challenge

Contact us today with all your separation and dewatering challenges.