Skip to main content

Separation & dewatering equipment for Canada and the United States since 2014Call 604.484.4516 · Toll free (888) 588-0480

BC Coast Fish Processing: Containerized Dewatering Case Study

A complete dewatering plant in a 20 ft container – HAUS DDE 2342 decanter, pumps, polymer, chemical dosing and cake conveyor – for the fish processing wastewater sludge of a salmon farming company on the BC coast.

20 ft BigSteelBox container with the inclined cake conveyor of the dewatering system in the Archer shop
2022Shipped
DDE 2342HAUS decanter in a 20 ft container
2.5 m³/hdesign sludge feed
20 % ± 2guaranteed cake solids

The application

The client farms and processes Atlantic salmon on the BC coast. The clarifier at its fish processing plant produces a sludge of 5–7 % solids that had to be dewatered before disposal.

The client wanted a self-contained unit that could be set down beside the clarifier, connected and run a few days a week. Archer built the whole dewatering plant into an insulated, heated 20 ft container, pre-piped and pre-wired in its Port Coquitlam shop.

The decanter is fed by a progressive cavity pump with polymer and pH/coagulant conditioning, and an inclined shaftless conveyor lifts the cake out through the container wall into a bin.

What Archer supplied

  • HAUS DDE 2342 dual-drive decanter centrifuge: duplex stainless bowl, 304 stainless wetted parts, sintered tungsten carbide wear protection, 7.5 kW main drive and 4 kW back-drive, automatic lubrication
  • BigSteelBox 20 ft container with insulation, heating, lighting, exhaust fan, spill tray and man-door
  • SYDEX progressive cavity sludge feed and polymer feed pumps, and a Victor stainless centrate pump with stainless centrate tank
  • Kozegho CL-D 600 polymer make-down unit and two Kozegho sludge holding tanks
  • Ferric chloride and sodium hydroxide dosing skids with Blue-White peristaltic pumps
  • SYDEX shaftless screw conveyor, 3 m at 30°, 304 stainless trough with HDPE liner
  • Endress+Hauser Promag W 400 sludge and polymer flowmeters
  • Stainless NEMA 4X control panel with Beckhoff PLC and 15″ touch screen running the centrifuge, pumps, polymer and conveyor

Design basis

FeedClarifier sludge from fish processing
Sludge volumeUp to 75,000 kg per week
Feed solids5.0–7.0 % TSS
Design flow2.5 m³/h
OperationAbout 30 h/week (10 h/day, 3 days/week)
GuaranteeCake 20 % ± 2 % TS, capture ≥ 95 %, polymer ≤ 12 kg/t DS
Bowl238 mm, L/D 4.0, 4,800 rpm (3,046 G)

Design figures from Archer proposal 0062401 R2 (November 2020).

The dewatering container loaded on a truck for delivery
Shipping. The finished container leaving for site in March 2022.
Inside the dewatering container during assembly
Assembly. Equipment fitted and piped inside the container.

Related

Talk to an engineer

Talk to an engineer about your separation challenge

Contact us today with all your separation and dewatering challenges.