Skip to main content

Separation & dewatering equipment for Canada and the United States since 2014Call 604.484.4516 · Toll free (888) 588-0480

Fish Meal, Fish Oil and Stickwater Separation

Decanters and disk stack separators that recover fish oil, return fines to the meal and clean up the stickwater.

In a fish meal plant, the press is only the start of the separation. The press liquor still carries fine solids, oil and dissolved protein, and how well they are separated decides the oil yield, the oil quality and the fat content of the meal. Archer Separation supplies the decanter centrifuges, disk stack separators and wastewater equipment for this part of the plant. The cooker, press, dryer and evaporator come from your plant builder; we make sure the separation line fits around them.

The challenge: oil, fines and protein in one hot liquid

After cooking at about 90–95 °C and pressing, the press liquor is a hot mixture of water, oil, fine fish solids and soluble protein. Fines left in the liquor clog the separators and end up in the oil. Oil left in the stickwater is lost or ends up in the meal. Temperature, residence time and machine size all matter, and raw fish changes with species and season.

Oil yield

Every kilogram of oil left in the stickwater or the meal is lost revenue.

Oil quality

Buyers set limits on water, impurities and free fatty acids, and price the oil accordingly.

Plant wastewater

Bloodwater, wash water and spills carry fat and protein that the sewer or receiving water will not accept.

Fish meal and oil plantsFish processing by-productsSurimi and fillet plantsMarine proteinPlant wastewater

Typical process flow

Typical process flowFish meal and fish oil: decanter and disk-stack separators
Process flow diagram: fish meal and fish oil with decanter and disk-stack separatorsRAW FISHCK-101Cookersteam heated, 90–95 °CPR-101Strainer + twin-screw press2PRESS CAKE TO DRYER1HX-101Liquor heater90–95 °CMD-101Decanterremoves fine solids3decanter solids4S-101Concentrator3-phase disk stackS-102Polisherdisk stackFISH OIL5STICKWATER TO EVAPORATORconcentrate returns to the press cakeTypical design basisCooking at 90–95 °CDecanter solids 30–40 % DS, to the dryerSeparator splits oil, stickwater, sludgePolished oil < 0.5 % water + impuritiesStickwater evaporated to 30–40 % DSStainless, CIP-capable designFish / solidsOilLiquor / stickwater

Generic flowsheet for illustration. Every Archer system is designed to its own basis; ask us for one drawn for your plant.

How the process works

Press

Cooked fish is strained and pressed. The press cake goes to the dryer; the press liquor is reheated to about 90–95 °C.

Decanter

A decanter removes the fine solids from the press liquor and returns them to the press cake, so they become meal instead of a nuisance.

Concentrate

A three-phase disk stack separator splits the clarified liquor into crude oil, stickwater and a small sludge discharge.

Polish

A second separator polishes the oil to market quality. The stickwater goes to the evaporator, and the concentrate goes back to the meal.

The plant’s wastewater, such as bloodwater, wash water and floor drains, can be treated in a DAF system. The DAF float is rich in fat and protein and can often be returned to the process or dewatered with a decanter.

What Archer supplies

HAUS decanters

Decanters from our partner HAUS Centrifuge Technologies for press liquor clarification, with stainless wetted parts and VFD-controlled bowl and scroll speeds.

Disk stack separators

Three-phase concentrators and oil polishers with self-cleaning bowls, sized for the liquor flow and the oil quality you sell.

DAF and chemical systems

DAF systems, chemical dosing and polymer systems for the plant wastewater.

Controls and monitoring

Control panels for the separation line, CIP sequences and IIoT remote monitoring of temperatures, flows and discharges.

Scope: Archer supplies the separation and wastewater equipment. The cooker, strainer, twin-screw press, dryer and evaporator are supplied by others, and we coordinate the interfaces with them.

Typical design basis

The figures below are typical for a conventional fish meal plant. Species, freshness and season all change them, so every line is designed to its own basis.

Separation temperatureTypically 90–95 °C
Decanter solidsTypically 30–40 % DS, returned to the press cake
ConcentratorThree-phase disk stack: oil, stickwater and sludge
Polished fish oilTypically below 0.5 % water and impurities
StickwaterTo the evaporator; concentrate (typically 30–40 % DS) back to the meal
CleaningStainless, CIP-capable separation line

Typical values for illustration only. Results depend on the raw material and are confirmed for each plant.

Why Archer Separation

Separation engineering for fish processors

  • Engineering, not just equipment. Our engineers draw the process, size the machines and write the control philosophy, then commission the system and train your operators.
  • Our own design tools. EPLAN for electrical design, SolidWorks for 3D models, OpenFOAM for CFD and code_aster for FEA, so panels, skids and containers are checked before they are built.
  • Testing before you buy. Samples of press liquor and stickwater are tested for oil, solids and separation behaviour, and the wastewater chemistry is worked out by jar testing before a DAF is sized.
  • Rental and demonstration unit. Our containerized decanter can run on your site, on your material, before you commit to a permanent plant.
  • Local support. Service and spare parts from our team in Canada and the US, with remote monitoring to tune and troubleshoot from our office.

Related pages

Talk to an engineer

Talk to an engineer about your separation challenge

Contact us today with all your separation and dewatering challenges.